Illustrative placeholder, not a verified stock photograph.
M-02 · Men’s relaxed straight
A fuller men’s straight
M-01 · Men’s regular straight
All gallery images are illustrative placeholders, not verified stock photographs.
A mid-rise, regular-seat straight leg in rigid cotton denim. This reference is washed as a clean indigo with subtle seam fading and no distressing. Use it as a starting fit — then confirm rise, inseam, leg opening, wash depth and branding on a sample.
Development reference. Final fabric, fit, wash and commercial terms are confirmed through sampling and the purchase order. Fabric weight is a pre-wash reference specification.
Illustrative development specification until the factory has photographed and approved the physical garment for public display.
Full specification
| Field | Value | Expansion |
|---|---|---|
| Style | M-01 · MEN’S · Regular straight | Use this style number in every message and on the sample hangtag so your team and ours are looking at the same garment. |
| Fit | Mid rise · regular seat and thigh · straight leg | Mid rise, with a regular seat and thigh and a straight leg from knee to hem. It is a workhorse men’s pattern, not a skinny and not a baggy. |
| Fabric | 100% cotton · 12 oz/yd² pre-wash · rigid | Rigid 100% cotton denim at a 12 oz per square yard pre-wash reference weight. After-wash handle is approved on the sample; we do not silently change the mill quality. |
| Colour base | Indigo | Indigo base. The clean wash keeps most of the depth, with only subtle contrast at seams. |
| Wash | Clean indigo, subtle seam fading, no distressing | Clean indigo with subtle seam fading and no whiskers, thigh fading or holes. A photograph can indicate depth; the approved pair sets the shade. |
| Customise | Rise, inseam, leg opening, wash and branding | Typical changes: rise, inseam, hem opening, indigo depth and your labels, patch and hardware. |
| Trims | Button, rivets, zip, patch and labels specified at sampling | Button, rivets, zipper, leather or alternative patch, main label and care label are specified at sampling. Send artwork for your own brand; we do not apply another company’s marks. |
| Sizing | Buyer size chart and grading · inches or centimetres | We work to your size chart and grading, in inches or centimetres. State the base size you will fit. |
| MOQ | Quoted per style, colour and wash | Quoted per style, colour and wash. Fabric, branded-trim and wash-batch minimums are included in the project quotation. |
| Sampling | Timing and cost confirmed after pattern/material review | Sample timing and cost are confirmed after we review the pattern and material readiness, including any revisions. |
| Bulk | Schedule agreed after sample approval and material readiness | The bulk schedule starts after written sample approval and material readiness. Say whether your target date is ex-factory, shipment or arrival. |
Measurement points
Measurement-points diagram
Technical drawing forthcoming.
Measuring action
Photograph forthcoming.
| Measurement point | How we measure |
|---|---|
| Waist | Across the waistband at the agreed point (top edge or mid-band), laid flat, doubled |
| Hip | Across at the agreed distance down from the back rise, laid flat, doubled |
| Front rise | Front crotch seam to top of waistband |
| Back rise | Back crotch seam to top of waistband |
| Thigh | Across at 2.5 cm below the crotch seam, or the buyer’s stated point, doubled |
| Knee | Across at mid-inseam or a fixed distance from the crotch, doubled |
| Leg opening / hem | Across the hem edge, doubled |
| Inseam | Crotch to hem (state whether the cuff is included) |
| Outseam | Top of waistband to hem |
| Waistband height | Height of the waistband itself |
| Back pocket position | Distance from waistband lower edge and from side seam |
Measure the garment laid flat, after the agreed wash and press. If your chart uses a different point — for example thigh at 1 inch down instead of 2.5 cm — write that on the enquiry. We will not guess.
Base-size chart
Industrial garments cannot be promised to the millimetre. Tolerances are agreed in the order documents and checked after wash.
| Size | Waist | Hip | Front rise | Back rise | Thigh | Knee | Hem | Inseam |
|---|---|---|---|---|---|---|---|---|
| Base size (factory to name) | To be confirmed on the approved sample | |||||||
| Tolerance | Agreed in the order documents — not promised as zero variance on this page | |||||||
What can change
| What changes | Typical approach | What must be redone | Risk |
|---|---|---|---|
| Rise | Raise or lower front/back rise | Pattern change and a new sample | Affects sit comfort and waistband hold |
| Inseam | Lengthen or shorten | Usually a pattern update | Shrinkage allowance must be recalculated |
| Leg opening | Open or close the hem | Redraw the knee-to-hem line | Closing too far stops it being a straight |
| Wash depth | Deeper or slightly lighter within clean indigo | New wash approval sample | Deeper shades usually stress dry/wet rubbing more |
| Branding | Patch, main label, care label, button artwork | Artwork and branded-trim minimums | We do not apply another company’s marks |
| Fabric swap | Change to another mill quality | Must re-sample | Shrinkage, colourfastness and handle all change |
Linked wash · Clean indigo
This garment is shown in Clean indigo: controlled shade, subtle seam contrast, no distressing. The wash page explains rubbing tests, hand feel and what this programme cannot do.
M-01 can be evaluated in Vintage blue, but whisker placement and strength limits must be agreed. A clean-indigo approved sample is not treated as the standard for a vintage programme.
Construction & hardware
Expected construction for this reference includes belt loops, a standard fly, front pockets, back pockets and reinforcement at stress points agreed on the sample. Thread colour is part of the clean-indigo look — a high-contrast gold thread and a tone-on-tone thread read as two different garments. Hardware metal finish is selected with the wash so a bright gold button does not fight a dark indigo unless you ask for that contrast.
Sampling & bulk path
- 1Select M-01 on the enquiry form, or list the parts you want to change.
- 2Confirm fabric, wash, size chart and trim artwork.
- 3Cut a base-size sample; revise once if needed.
- 4Approve the wash standard and the size set.
- 5Schedule bulk after material readiness; in-process and final checks follow the quality page.
Related references
Illustrative placeholder, not a verified stock photograph.
W-01 · Women’s high-rise wide leg
A women’s wide leg
Start from my own design instead
You already have a pattern
Style FAQ
Can I buy one pair from this page?
No. This is a manufacturing reference. Use the enquiry form for sampling and bulk.
Is 12 oz the after-wash weight?
No. It is a pre-wash reference unless we later publish a measured after-wash weight.
Can you add heavy rips to M-01?
That changes the programme. We would evaluate fabric strength and issue a new wash standard; it would no longer be a clean indigo reference.
What we confirm and what we do not claim
What we confirm
- This style is a development reference
- Fabric weights are pre-wash reference specifications
- An approved physical sample sets the bulk standard
What we do not claim
- These references are not in stock or ready to ship
- We do not promise zero fading or zero shrinkage
- We do not claim test results we cannot back with a report